Japan, Sept. 18 -- RENISHAW PLC has got intellectual property rights for 'WORKPIECE PRODUCTION METHOD AND MANUFACTURE SYSTEM.' Other related details are as follows:
Application Number: JP,2024-220091
Category (FI): G05B19/418@Z
Stage: PROBLEM TO BE SOLVED: To more efficiently use a production machine and measuring instrument.SOLUTION: Plural similar workpieces are produced with at least one production machine. At least some of the workpieces are measured using two or more measuring instruments. A dimension or point of one workpiece is measured with one of the measuring instruments, and the dimensions or points of the other workpieces are measured with the other measuring instrument. The measuring instruments employed in measuring the workpieces are selected based on whether they are not the busiest or most appropriate. Results of measurements of the dimensions or points performed with the two or more measuring instruments are analyzed all together. An output signal is generated based on the analysis on the results. The output signal represents the performance of the production machine or the performances of one or plural ones of the measuring instruments.SELECTED DRAWING: Figure 1 (Grant)
Filing Date: Dec. 16, 2024
Publication Date: March 11, 2025
The original document can be viewed at: https://www.j-platpat.inpit.go.jp/p0100
Disclaimer: Curated by HT Syndication.
